Frequently Asked Questions
General Information
Yes, but changes can only be implemented within the drawing and are not saved in the base library provided by the manufacturer.
Yes, Specifi® permits to synchronize the drawing with the offer in order to maintain aligned the inserted products.
You can import your own blocks 2D and/or 3D. Specifi® recommends that these blocks comply with the Specifi® standards so that they can be used to the fullest of the functionality of the software.
Yes, Specifi® permits to select which technical data you want to insert into the schedule.
No, the generation of technical legends is automatic. Each item inserted into the drawing contains all the technical and commercial information, and they will be reported automatically into the schedule or exported to the offer.
Yes, Specifi® Design module, permits to create automatically the offer from the drawing, exporting all the products’ information through Offer Synchronization command.
Specifi® lets you create fast and easy rendering. The rendering quality depends on the CAD application that you use as well as the user’s experience with other factors (such as light position, room size, etc.).
If the library is incomplete and a block is missing, Specifi® will automatically generate blocks of the indicated size. The blocks will be simple cubes to specify the maximum volumetric footprint that the equipment can have.
Miniumum Requirements
Yes, changes can only be implemented within an offer or drawing and are not saved in the base library provided by the manufacturer.
Yes, but changes can only be implemented within the drawing and are not saved in the base library provided by the manufacturer.
Yes, Specifi® permits to synchronize the drawing with the offer in order to maintain aligned the inserted products.
You can import your own blocks 2D and/or 3D. Specifi® recommends that these blocks comply with the Specifi® standards so that they can be used to the fullest of the functionality of the software.
Yes, Specifi® permits to select which technical data you want to insert into the schedule.
No, the generation of technical legends is automatic. Each item inserted into the drawing contains all the technical and commercial information, and they will be reported automatically into the schedule or exported to the offer.
Yes, Specifi® Design module, permits to create automatically the offer from the drawing, exporting all the products’ information through Offer Synchronization command.
Specifi® lets you create fast and easy rendering. The rendering quality depends on the CAD application that you use as well as the user’s experience with other factors (such as light position, room size, etc.).
If the library is incomplete and a block is missing, Specifi® will automatically generate blocks of the indicated size. The blocks will be simple cubes to specify the maximum volumetric footprint that the equipment can have.
Software Management
Yes, changes can only be implemented within an offer or drawing and are not saved in the base library provided by the manufacturer.
Yes, but changes can only be implemented within the drawing and are not saved in the base library provided by the manufacturer.
Yes, Specifi® permits to synchronize the drawing with the offer in order to maintain aligned the inserted products.
You can import your own blocks 2D and/or 3D. Specifi® recommends that these blocks comply with the Specifi® standards so that they can be used to the fullest of the functionality of the software.
Yes, Specifi® permits to select which technical data you want to insert into the schedule.
No, the generation of technical legends is automatic. Each item inserted into the drawing contains all the technical and commercial information, and they will be reported automatically into the schedule or exported to the offer.
Yes, Specifi® Design module, permits to create automatically the offer from the drawing, exporting all the products’ information through Offer Synchronization command.
Specifi® lets you create fast and easy rendering. The rendering quality depends on the CAD application that you use as well as the user’s experience with other factors (such as light position, room size, etc.).
If the library is incomplete and a block is missing, Specifi® will automatically generate blocks of the indicated size. The blocks will be simple cubes to specify the maximum volumetric footprint that the equipment can have.
Libraries
Yes, changes can only be implemented within an offer or drawing and are not saved in the base library provided by the manufacturer.
Yes, but changes can only be implemented within the drawing and are not saved in the base library provided by the manufacturer.
Yes, Specifi® permits to synchronize the drawing with the offer in order to maintain aligned the inserted products.
You can import your own blocks 2D and/or 3D. Specifi® recommends that these blocks comply with the Specifi® standards so that they can be used to the fullest of the functionality of the software.
Yes, Specifi® permits to select which technical data you want to insert into the schedule.
No, the generation of technical legends is automatic. Each item inserted into the drawing contains all the technical and commercial information, and they will be reported automatically into the schedule or exported to the offer.
Yes, Specifi® Design module, permits to create automatically the offer from the drawing, exporting all the products’ information through Offer Synchronization command.
Specifi® lets you create fast and easy rendering. The rendering quality depends on the CAD application that you use as well as the user’s experience with other factors (such as light position, room size, etc.).
If the library is incomplete and a block is missing, Specifi® will automatically generate blocks of the indicated size. The blocks will be simple cubes to specify the maximum volumetric footprint that the equipment can have.
Specifi® Design
Yes, changes can only be implemented within an offer or drawing and are not saved in the base library provided by the manufacturer.
Yes, but changes can only be implemented within the drawing and are not saved in the base library provided by the manufacturer.
Yes, Specifi® permits to synchronize the drawing with the offer in order to maintain aligned the inserted products.
You can import your own blocks 2D and/or 3D. Specifi® recommends that these blocks comply with the Specifi® standards so that they can be used to the fullest of the functionality of the software.
Yes, Specifi® permits to select which technical data you want to insert into the schedule.
No, the generation of technical legends is automatic. Each item inserted into the drawing contains all the technical and commercial information, and they will be reported automatically into the schedule or exported to the offer.
Yes, Specifi® Design module, permits to create automatically the offer from the drawing, exporting all the products’ information through Offer Synchronization command.
Specifi® lets you create fast and easy rendering. The rendering quality depends on the CAD application that you use as well as the user’s experience with other factors (such as light position, room size, etc.).
If the library is incomplete and a block is missing, Specifi® will automatically generate blocks of the indicated size. The blocks will be simple cubes to specify the maximum volumetric footprint that the equipment can have.
Specifi® Quote
Yes, changes can only be implemented within an offer or drawing and are not saved in the base library provided by the manufacturer.
Yes, but changes can only be implemented within the drawing and are not saved in the base library provided by the manufacturer.
Yes, Specifi® permits to synchronize the drawing with the offer in order to maintain aligned the inserted products.
You can import your own blocks 2D and/or 3D. Specifi® recommends that these blocks comply with the Specifi® standards so that they can be used to the fullest of the functionality of the software.
Yes, Specifi® permits to select which technical data you want to insert into the schedule.
No, the generation of technical legends is automatic. Each item inserted into the drawing contains all the technical and commercial information, and they will be reported automatically into the schedule or exported to the offer.
Yes, Specifi® Design module, permits to create automatically the offer from the drawing, exporting all the products’ information through Offer Synchronization command.
Specifi® lets you create fast and easy rendering. The rendering quality depends on the CAD application that you use as well as the user’s experience with other factors (such as light position, room size, etc.).
If the library is incomplete and a block is missing, Specifi® will automatically generate blocks of the indicated size. The blocks will be simple cubes to specify the maximum volumetric footprint that the equipment can have.
